Product Details
Electric tubular heating element immersion flange heater heating elements for oil are designed for heating or temperature maintening of liquids, gas or mixture in static or circulation conditions. The design is based on customer process conditions: fluid to heat (type and properties), in/out temperature, pressure, heat exchange conditions (stagnant or flowing), and environment conditions (ATEX or not, onshore or offshore, etc.). Flange immersion heaters can be straight or L-shaped.
Technical Data
Flange size |
DN 50 to DN 800 |
Screw plug size |
1"- 3" |
Tube Diameter |
8-16 mm |
Immersion Length |
150mm- 1500mm |
Heating Element |
3 elements, 4 elements, 6 elements, 10 elements etc under customer request |
Wattage density |
2-8W/cm2 |
Voltage |
UP to 600V |
Sheath Material |
Stainless Steel 304 316L 310S Copper Incoloy 800 840 |
Built in thermostat well |
Built-in thermostat wells can be installed upon request. When ordering, please provide length BUILT-IN THERMOSTAT WELL and internal diameter |
The immersion heating element of this type of heater is a blend of numerous compounds making it sturdier; thus, resulting in features such as resistance against corrosion as well as long term durability. Copper, Incoloy, hastalloy, titanium, steel and stainless steel are effective sheath material. Different oils that maybe heavy, lubricant or light, being wax, soap, liquid detergents, or with de-ionized water are heated up with flange heaters. They are also used in industries where military ammunition and chemicals are manufactured
http://www.etdzheater.com/